CCR1016-12G
CCR1016 is an industrial grade super fast router with cutting edge 16 core CPU. If you need many millions of packets per second - Cloud Core Router is your best choice.
The cloud core router is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.
The device is available with a 1U rackmount case, has twelve Gigabit ethernet ports, a serial console cable and a USB port. The CCR1016-12G has two SODIMM slots, by default it is shipped with 2GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). It comes with power supply and 1U rackmount case.
Specifications
| Details |
|---|
| Product code | CCR1016-12G |
| Architecture | TILE |
| CPU | TLR4-01680CH-12CE-A3b |
| CPU core count | 16 |
| CPU nominal frequency | 1.2 GHz |
| Dimensions | 355x145x44mm |
| License level | 6 |
| Operating System | RouterOS v6 (64bit) |
| Size of RAM | 2 GB |
| Storage size | 512 MB |
| Storage type | NAND |
| Tested ambient temperature | -20C .. +60C |
| Suggested price | $645.00 |
Powering
| Details |
|---|
| Max Power consumption | 48W |
| Number of AC inputs | 1 |
| AC input range | 100-240 V |
Ethernet
| Details |
|---|
| 10/100/1000 Ethernet ports | 12 |
Peripherals
| Details |
|---|
| Number of USB ports | 1 |
| Serial port | RS232 |
| USB Power Reset | Yes |
| USB slot type | microUSB type AB |
Other
| Details |
|---|
| CPU temperature monitor | Yes |
| Current Monitor | Yes |
| PCB temperature monitor | Yes |
| Voltage Monitor | Yes |
Ethernet test results
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
IPsec test results
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Quick Guide